H2 V8-6.2L (2008)
4. Remove the upper plenum J nut (1) securing the heated washer pump mounting bracket to the plenum flange.
5. Disconnect the upper (outlet) washer plenum hose (2).
6. Disconnect the lower (inlet) washer container hose (3) from the heated washer pump.
7. Removed the heated washer pump from the vehicle.
Installation Procedure
1. Position the heated washer pump in the engine compartment near the washer container.
2. Finger start the J nut for the plenum attachment.
3. Connect the washer container lower hose (inlet) to the heater pump lower port (3).
4. Connect the upper plenum washer hose (outlet) to the heater unit upper port (2).
