Fluid - A/T: Specifications (page 7 of 8)
- Make
- Hummer
- Model
- H3
- Engine
- L5-3.7L
- Year
- 2007
- Section
- Fluids › Fluid - A/T
MaintenanceSpecifications · page 7 of 8
1. Coat the new filter seal with clean automatic transmission fluid.
2. Install the new filter seal into the transmission case. Tap the seal into place using a suitable size socket.
3. Install the new filter into the case.
4. Install the oil pan and a new gasket.
Notice: Refer to Fastener Notice.
5. Install the oil pan bolts.
Tighten the oil pan to transmission case bolts alternately and evenly to 16 N.m (12 lb ft).
6. Remove the container used to catch the used transmission fluid from under the vehicle.
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 2007 Hummer H3 3.7L
- PARTTransmission filter kitSearch: Hummer H3 2007 3.7L transmission filter kit
- FLUIDAutomatic transmission fluidSearch: Hummer automatic transmission fluid
- TOOLFluid transfer pumpSearch: fluid transfer pump
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.