H3 L5-3.7L (2007)
Fuel Rail: Service and Repair
Fuel Injection Fuel Rail Assembly Replacement
Removal Procedure
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (With CH 48027) Fuel Pressure Relief (Without CH 48027).
2. Disengage the fuel feed quick connect locking clip (1).
3. Disconnect the fuel feed line from the fuel rail.
4. Refer to Plastic Collar Quick Connect Fitting Service in order to disconnect the evaporative emission (EVAP) purge hose (1) from the following:
* The throttle control module (2)
* The EVAP canister purge solenoid valve (3)
5. Remove the intake manifold.