H3 V8-5.3L (2008)
10. Connect the 4 brake pipe fittings to the master cylinder.
Tighten the fittings to 19 N.m (14 lb ft).
11. Adjust the stop lamp switch. Refer to Stop Lamp Switch Adjustment (See: Lighting and Horns/Brake Light Switch/Adjustments) .
12. Adjust the cruise release switch. Refer to Cruise Release Switch Adjustment (See: Cruise Control/Cruise Control Switch/Adjustments) .
13. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual without RPO BRM) (See: Brakes and Traction
Control/Brake Bleeding/Service and Repair/Hydraulic Brake System Bleeding (Manual without RPO BRM))Hydraulic Brake System Bleeding
(Manual with RPO BRM) (See: Brakes and Traction Control/Brake Bleeding/Service and Repair/Hydraulic Brake System Bleeding (Manual with
RPO BRM))Hydraulic Brake System Bleeding (Pressure without RPO BRM) (See: Brakes and Traction Control/Brake Bleeding/Service and
Repair/Hydraulic Brake System Bleeding (Pressure without RPO BRM))Hydraulic Brake System Bleeding (Pressure with RPO BRM) (See:
Brakes and Traction Control/Brake Bleeding/Service and Repair/Hydraulic Brake System Bleeding (Pressure with RPO BRM)) .
