Accent GT Coupe L4-1495cc 15L DOHC MFI (1997) - Transmission Position Switch/Sensor TSB
RANGE SWITCH REPLACEMENT:
9. Install the new range switch and loosely install two 10 mm bolts.
10. Attach the lever and nut. Tighten the nut to specification. Go to Step 11.
Specification: 11-13 lb ft. (15-18 Nm, 150-180 kg.cm)
RANGE SWITCH ADJUSTMENT:
11. Loosen the two 10 mm mounting bolts.
12. Disconnect the shift cable at the lever.
13. Insert a 5mm drill or M5 (5mm) bolt in the adjustment hole of the range switch. Tighten the two 10 mm mounting bolts to specification. Remove the
5mm drill or M5 bolt.
Specification: 7-8 lb ft. (10-12 Nm, 100-120 kg.cm)