Accent GT Coupe L4-1495cc 1.5L DOHC MFI (1997)
14. Move the shift lever to the "N" position. Attach the shift cable to the lever and install the nut. Tighten the nut to specification.
Specification: 9-10 lb ft. (12-13 Nm, 120-130 kg.cm)
15. Attach the connector.
16. Drive the vehicle two key-on to key-off drive cycles, including shifting to gears D, 3, 2, L (if equipped) and R. If the:
^ DTC does not reset, return the vehicle to the customer.
^ DTC resets, repair or replace the control harness. If the DTC sets again, replace the TCM.