Genesis Sedan V6-3.8L (2009)
4. Connect the transmission wire to the 2 clamps (A) and the 9 solenoid connectors to the solenoids.
5. Coat a new "O" ring with ATF and install it to the oil stariner.
O-ring size:
inner dia.-31.00mm(1.22in), thickness-2.72mm(0.107in)
6. Install the oil strainer with the 4 bolts to the valve body assembly.
Tightening torque :
8.2 - 12.2 Nm(0.82 - 1.22 kgf.m, 5.93 - 8.82 lb-ft)
Bolt size(11) :M6x1.0x16mm
7. Clean the contact surfaces of oil pan and transmission case.
8. Install the 3 oil cleaner magnets to the oil pan.
9. Install a new oil pan gasket (A) and the oil pan to the transmission case by tightening the 20 bolts.
Tightening torque :
6 - 8 Nm(0.6 - 0.8 kgf.m, 4.34 - 5.78 lb-ft)
Bolt size(4) :M6x1.0x14.5mm
CAUTION:
-
Be careful not to damage the fitting surfaces of the transmission case and the oil pan.
-
Be careful not to deform the oil pan.