Santa Fe V6-3.5L (2004)
1. Apply genuine brake fluid to the rubber parts of the cylinder kit and grommets.
2. Carefully insert the springs and pistons in the proper direction.
3. Press against the pistons with a screwdriver and install the retainer ring.
4. With the piston pushed completely home by a screwdriver, install the piston pin.
5. Mount two grommets.
6. Install the reservoir on the cylinder.
INSTALLATION
1. Install the master cylinder to the brake booster.
2. Install the booster and master cylinder to the dash panel.
3. Connect the brake tubes to the master cylinder.
4. Install the vacuum hose tightly.
5. Connect the operating rod to the brake pedal.
6. After filling the brake reservoir with the brake fluid, bleed the system.
CAUTION: Don't disassemble the brake booster.
