Santa Fe FWD V6-3.3L (2009)
![background image](/hyundai/santa_fe_fwd/v6-3.3l/Page-1567003.png)
6. Remove the rear wheel & tire.
7. Remove the rear brake caliper and disc.
8. Disconnect the brake cable (A) from the parking brake assembly.
9. Loosen all of the cable guide bracket bolts.
10. Remove the both of brake shoes holder (A) and pin (B).
11. Remove the upper spring (A) and strut (B).
12. Remove the lower spring (A), adjuster assembly (B), and brake shoes.
Installation
1. Installation is the reverse of removal.
2. After installation, adjust the parking brake.