Santa Fe FWD V6-3.3L (2009)
![background image](/hyundai/santa_fe_fwd/v6-3.3l/Page-617006.png)
NOTE: Once the liquid gasket is applied to the sealing surfaces, be sure to assemble the parts within 5 minutes to prevent premature drying of the
liquid gasket.
38. Carefully locate the timing chain cover into position and then attach to the engine.
39. Reinstall the center galley coolant hose and hose clamp.
40. Tighten all timing chain cover fasteners to specifications.
41. Apply thin bead of liquid gasket and reinstall lower oil pan assembly.
42. Install new front main oil seal.
43. Reinstall all the removed components in reverse order of removal.
NOTE: When reattaching the LH upper mounting bracket to the transmission case, hand-tighten all 4 bolts to snug and then final torque to
specification.