Santa Fe FWD V6-3.3L (2009)
NOTE: Before reinstalling both valve covers, remove any old liquid gasket residue at the top surfaces between the timing cover and the cylinder
heads. Reapply liquid gasket to fill the seam points on the top surface between the timing cover and the cylinder head as shown (there are 2
seam points for each cylinder bank).
- Bead width: 0.1 in (2.5 mm)
- Install the valve covers within 5 minutes after applying the liquid gasket.
NOTE: Use a suitable tool to properly allow the cooling system to eliminate the remaining air while the engine is idling.
NOTE: Reset clock, radio presets, and (if equipped) FATC setting to display —F instead of —C for temperature.
44. Verify repair.