Santa Fe GLS V6-2.7L (2002)
As shown in illustration, install the clutch disc, side gear, preload spring and spring plate, and then adjust the clearance of the preload spring by
applying the pressure at both sides till it is 32 mm as shown in illustration. At this time, measure the height of side gear sub at RH, LH sides by
measuring the length of "D"
4. Selecting shims by the side gear sub height
a. Used disc
Shim thickness = RH (LH) pocket - RH (LH) side gear sub height - 6.45
b. New disc
Shim thickness = RH (LH) pocket - RH (LH) side gear sub height - 6.20
NOTE:
^
Adjust the shim thickness within 0.08 mm.
^
When replacing one disc, replace all of the discs.
5. The specifications of the clutch disc shim
REASSEMBLY
1. Install the clutch disc guide and clutch disc in order.
NOTE: Apply grease to the clutch disc guide and clutch disc before reassembly.
2. Install the clutch preload plate and side gear.