Santa Fe GLS V6-2.7L (2002)
2. Check the propeller shaft for bonds, twisting or damage.
3. Check the universal joints for smooth operation in all directions.
4. Check the center bearing for smooth movement.
5. Check the center bearing mounting rubber for damage or deterioration.
6. Check the rubber coupling for damage or deterioration.
7. Measure the propeller shaft runout with a dial indicator.
Limit: 0.5 mm (0.02 inch)
INSTALLATION
1. Apply the grease to the rubber coupling centering device.
Recommended grease: ALVANIA EP #2 (8 - 10 gr.)
2. Insert the rubber coupling centering device to the differential drive pinion slightly.
NOTE: Align the propeller shaft for reassembly. Support the center bearing assembly.