Scoupe L4-1468cc 1.5L SOHC VIN J MFI (1994)
3. Pack the inner surface of the clutch release bearing and the groove with the specified grease.
Specified grease: MOLYWHITE TA No.2
4. Apply a coating ot the specified grease to the clutch disc spline, and then use a brush to rub it in.
Specified grease: MOLYWHITE No.2
5. Using the special tool (clutch disc guide), position the clutch disc to the flywheel.
6. Install the clutch cover assembly Tighten the bolts a little at a time, working in diagonal sequence, finally tightening them to the specified torque.
7. Before installing the transaxle assembly, apply a coating of the specified grease to the input shaft spline, and then rub in by using a brush.
Specified grease : MOLYWHITE TA NO.2