Sonata V6-2.7L (2004)
1. Note the direction of the oil seal.
2. Use a new oil seal.
6. Apply the specified fluid to the entire surface of the rack bushing oil seal.
Recommended fluid: Power steering fluid (PSF-3)
7. Install the oil seal on the rack bushing.
8. Apply the specified fluid to the entire surface of the O-ring and install to the rack bushing using the special tool (09431-11000).
9. Apply the specified grease to the rack teeth and wrap with vinyl tape.
Recommended grease Multipurpose grease SAE J310a, NLGI grade #2 EP
Caution: Do not plug the vent hole in the rack with grease.
10. Insert the rack into the gear housing.
Install the rack bushing and rack stopper.
11. Push in the rack stopper until the circlip groove of the rack stopper is aligned with the notched hole of the rack housing and then install the circlip
while turning the rack stopper.
Caution: The circlip end should not be visible through the notched hole of the rack housing.
12. Apply the specified fluid and grease to the pinion valve assembly and install to the gear housing assembly.
