Sonata V6-2.7L (2004)
Recommended fluid: Power steering fluid (PSF-3)
Recommended grease: Multipurpose grease SAE J310a, NLGI grade #2 EP
13. Install the ball bearing using special tool (09222-21100).
14. Install the pinion and valve assembly to the valve housing.
15. Install the oil seal using the special tool (09432 - 21601).
16. Install the snap ring with snap ring plier.
17. With the pinion turned all the way clockwise, tighten the self-locking nut.
Caution: Always replace the self-locking nut with a new one.
18. Apply semi-drying sealant to the threaded section of the end plug and tighten to the specified torque.
Tightening torque 50 - 70 Nm (500 - 700 kg-cm, 36 - 51 ft. lbs.)
19. Stake the end plug at two points on its circumference with a punch.