Sonata V6-3.3L (2006)
4. Using the special tools (09568-4A000), disconnect the upper arm ball joint from the knuckle.
5. Remove the front strut assembly.
6. Remove the two upper arm mounting bolts (A) from the body.
Inspection
FRONT UPPER ARM
INSPECTION
1. Check the bushing for wear and deterioration.
2. Check the upper arm for bending or breakage.
3. Check the ball joint for rotating torque.
1. If there is a crack in the dust cover, replace it and add grease.
2. Shake the stabilizer link ball joint stud several times.
3. Mount the self-locking nut on the ball joint, and then measure the ball joint rotating torque.
Standard value: 0.5 - 1.5 Nm (5 - 15 kgf-cm, 0.36 - 1.09 ft. lbs.)