Sonata V6-3.3L (2006)
4. If the rotating torque exceeds the upper limit of standard value, replace the upper arm assembly.
5. Even if the rotating toque is below the lower limit of the standard value, the ball joint may be reused unless it has drag and excessive play.
Installation
FRONT UPPER ARM
INSTALLATION
1. Install the two upper arm mounting bolts (A) to the body
Tightening torque 55 - 65 Nm (5.5 - 6.5 kgf-m, 39.8 - 47.0 ft. lbs.)
2. Install the front strut assembly.
3. Install the upper arm ball joint self-locking nut (A) and the split pin (B).
Tightening torque 35 - 45 Nm (3.5 - 4.5 kgf-m, 25.3 - 32.5 ft. lbs.)
4. Install the wheel and the tire to the front hub.
