Tiburon V6-2.7L (2004)
2. Loosen the four bolts and remove the oil pump cover assembly.
3. Remove the cam ring.
4. Remove the rotor and vanes.
5. Remove the oil pump side plate.
6. Remove the inner and outer O-ring.
7. Remove the side plate spring.
NOTE: When assembling, use a new gasket and O-ring.
8. Mount the pulley in a vise and remove the pulley nut and the spring washer.
9. Pull the pulley out.
10. After removing the snap ring of the shaft with snap ring pliers, remove the dust spacer.