Tucson AWD L4-2.4L (2010)
78.4 - 98.0N.m(8.0 - 10.0Kgf.m, 57.8 - 72.3lb.ft)
4. Remove castle nut (A) from the front hub under applying the break.
Tightening torque :
196.1 - 274.5N.m(20.0 - 28.0Kgf.m, 144.6 - 202.5lb.ft)
CAUTION:
The washer (B) should be assembled with convex surface outward when installing the castle nut (A) and split pin (C) Also, don't reuse split pin (C)
when reassembling.
5. Remove the wheel speed sensor (B).
Tightening torque :
6.8 - 10.8N.m( 0.7 - 1.1Kgf.m,5.1 - 7.9lb.ft)
6. Remove the tie rod end ball joint(C) from the knuckle.
(1) Remove the split pin (A).
(2) Remove the castle nut (B).
Tightening torque :
34.3 - 44.1N.m(3.5 - 4.5Kgf.m, 25.3 - 32.5 lb.ft)