Tucson AWD L4-2.4L (2010)
CAUTION:
Apply a few drops of oil to the special tool. (Boot contact part)
7. Remove the lower arm (A) mounting bolt from the knuckle.
Tightening torque :
98.0 - 117.6N.m( 10.0 - 12.0Kgf.m,72.3 - 86.7lb.ft)
8. Disconnect the drive shaft end (A) from the knuckle.
9. Remove the driveshaft assembly (A) from the inner shaft.
10. Inner shaft mounting bolts and then disconnect the inner shaft (A).
11. Insert a pry bar (A) between the transaxle case and joint case , and separate the driveshaft (B) from the transaxle case.