FX35 RWD V6-3.5L (VQ35HR) (2010)
3. Remove back door finisher upper fixing nuts (A).
4. Disconnect back door request switch harness connector (B).
5. Pull harness grommet (C) outwards from back door to release.
6. Remove back door finisher upper (1) fixing clips with remover tool (A).
CAUTION:
-
Apply protective tape (B) on the back door panel to protect the painted surface from damage.
-
Never use an item as a remover tool that could damage back door panel.
-
Disengage the clips slowly and carefully.
-
Never pull the back door finisher upper strongly.
Circle : Clip
7. Pull back door finisher upper to remove.
8. Remove door handle cover (1) fixing clips (A).
9. Remove door handle cover fixing pawls, and then remove door handle cover.
Triangle : Pawl
BACK DOOR FINISHER LOWER