FX35 RWD V6-3.5L (VQ35HR) (2010)
1. With a remover tool (A) and cutter knife (B), take off double-faced adhesive tape, and then disengage back door finisher lower (1) fixing pawls.
CAUTION:
-
Apply protective tape (C) on the back door panel to protect the painted surface from damage.
-
Never use an item as a remover tool that could damage back door panel.
-
Disengage the pawls slowly and carefully.
-
Never pull the back door finisher lower strongly.
Triangle : Pawl
2. Pull and remove back door finisher lower.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
Remove double-faced adhesive tape remaining on back door with a double-faced adhesive tape remover, after removing back door
finisher lower.
-
Never wash the vehicle within 24 hours after installing so as to keep adhesive.