G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
/Page-553011.png)
^
Make sure that intake and exhaust cam nose on No. 1 cylinder (engine front side of right bank) are located as shown in the figure.
^
If not, turn crankshaft one revolution (360 degrees) and align as shown in the figure.
b. Use a feeler gauge, measure the clearance between valve lifter and camshaft.
Valve clearance
^
By referring to the figure, measure the valve clearances at locations marked "x" as shown in the table (locations indicated in the figure).