G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
^
No. 1 cylinder at compression TDC
c. Rotate crankshaft by 240 degrees clockwise (when viewed from engine front) to align No. 3 cylinder at TDC of its compression stroke.
NOTE: Crankshaft pulley mounting bolt flange has a stamped line every 60 degrees. They can be used as a guide to rotation angle.
^
By referring to the figure, measure the valve clearances at locations marked "x" as shown in the table (locations indicated in the figure).
^
No. 3 cylinder at compression TDC
d. Rotate crankshaft by 240 degrees clockwise (when viewed from engine front) to align No. 5 cylinder at TDC of compression stroke.