M35x AWD V6-3.5L (VQ35HR) (2010)
Body Control Module: Service and Repair
BCM (BODY CONTROL MODULE)
Removal and Installation of BCM
REMOVAL
1. Remove glove box cover. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Locations/Instrument Panel.
2. Remove screws (A), and pull out the BCM (1).
3. Disconnect connector.
4. Remove BCM (1).
INSTALLATION
Installation is the reverse order of removal.
NOTE:
When replacing BCM perform initialization of NATS system and registration of all NATS ignition key IDs.