QX56 RWD V8-5.6L (VK56DE) (2006)
5. Remove bolt from seat belt anchor base and remove seat belt buckles.
INSTALLATION
Installation is in the reverse order of removal.
-
Make sure seat belt height adjuster is locked in the lowest position during installation.
-
Seat belt anchor base should be flat to the floor during installation and not on the anti-rotation bead.
Center
Removal and Installation of Third Row Seat Belt
Third Row Center
REMOVAL
1. Remove the rear roof finisher. Refer to "LUGGAGE FLOOR TRIM".
2. Lower the rear portion of the headliner.
3. Remove the seat belt retractor anchor bolts and retractor and belt assembly.
INSTALLATION
Installation is in the reverse order of removal.