QX56 RWD V8-5.6L (VK56DE) (2006)
Seat Belt Buckle: Service and Repair
Front
FRONT SEAT BELT BUCKLE
Removal
1. Remove the front seat.
2. Remove the seat cushion. Refer to "SEAT CUSHION TRIM AND PAD (DRIVER) OR SEAT CUSHION ASSEMBLY (PASSENGER)".
3. Disconnect the seat belt buckle pre-tensioner electrical connector
CAUTION:
-
For removing pre-tensioner connector, insert a thin screwdriver (1) wrapped in tape (3) into the notch. Lift the locking tab to unlock (2), then
remove the connector.
-
Install the pre-tensioner connector with the locking tab raised, then push the locking tab into the connector to lock (4).
4. Remove screw and seat cushion inner finisher.
5. Remove the anchor bolt, then remove front seat belt buckle from the seat frame.
Installation
Installation is in the reverse order of removal.