QX56 RWD V8-5.6L (VK56DE) (2006)
Seat Belt Buckle: Service and Repair
Third Row
THIRD ROW SEAT BELT BUCKLE
Removal
1. Place seatback RH/LH in the folded position.
2. Remove luggage floor board assembly and storage box. Refer to "LUGGAGE FLOOR TRIM".
3. Remove seat belt buckle bolt (2) from rear seat hinge (1).
-
<=: Vehicle front
Seat belt buckle bolt : 49 N.m (5.0 kg-m, 36 ft-lb)
4. Remove push pin (2) and release elastic ban (3) from frame (1). Repeat for opposite seat.
-
<=: Vehicle front
5. Partially lift seatback upright, then remove seat belt buckle (2) from between hinge cover (1) and seat cushion side facing (3). Repeat for LH seat.
-
<=: Vehicle front
Installation
Installation is in the reverse order of removal.
-
Raise and lock both seats in the full upright position to check for abnormal noises or binding.