QX56 RWD V8-5.6L (VK56DE) (2006)
Drive/Propeller Shaft: Service and Repair
Removal and Installation
Removal and Installation
REMOVAL
1. Move the A/T select lever to the N position and release the parking brake.
2. Put matching marks on the rear propeller shaft flange yoke and the companion flange of the rear final drive as shown.
CAUTION: For matching marks, use paint. Never damage the rear propeller shaft flange yoke or the companion flange.
3. Remove the bolts, then remove the propeller shaft from the rear final drive and A/T.
INSPECTION AFTER REMOVAL