QX56 RWD V8-5.6L (VK56DE) (2006)
/Page-1214002.png)
^
Inspect the propeller shaft run out. If run out exceeds the limit, replace the propeller shaft assembly
Propeller shaft runout limit: 1.02 mm (0.0402 inch) or less
^
While holding the flange yoke on one side, check axial play of the joint as shown. If the journal axial play exceeds the specification, replace the
propeller shaft assembly.
Journal axial play: 0.02 mm (0.0008 inch) or less
^
Check the propeller shaft for bend and damage. If damage is detected, replace the propeller shaft assembly.
INSTALLATION
Installation is in the reverse order of removal.
^
After installation, check for vibration by driving the vehicle.
CAUTION: Do not reuse the bolts and nuts. Always install new ones.
