Amigo 2WD V6-3.2L (1999)
-
Pry the trim cover clips free from the body panel.
5. Remove the rear seat belt lower anchor bolt cover and the lower anchor bolt (5).
6. Remove the quarter trim cover (1).
-
Remove the tool box lid (3) and 3 fixing screws (4).
-
Pry the quarter trim cover retainers (2) tree from the body panel.
7. Remove the center lower trim cover.
-
Remove the front seat belt lower anchor bolt cover and lower anchor bolt.
-
Remove the sill plate and pry the trim cover clips free from the body panel.
8. Remove the center upper trim cover.
-
Turn up the finisher and pry the trim cover clips free from the body panel.
9. Remove the front pillar trim cover.
-
Turn up the finisher and pry the trim cover clips free from the body panel.
Installation
To install, follow the removal steps in the reverse order, noting the following point:
1. Tighten the seat belt anchor bolt to the specified torque.
Torque: 39 Nm (29 lb.ft)
