Amigo 4WD L4-2.3L (4ZD1) (1989)
Ignition Cable: Testing and Inspection
Fig. 1 Ignition Wire Resistance Chart
The ignition wires contain a synthetic conductor which is easily damaged. Do not stretch or kink the cable. Do not stick a needle or the pointed end of
a probe into the cable during a timing check. An increase in resistance will occur at that point causing the cable to burn. Using a ohmmeter, check the
resistance of the ignition wire. Refer to ignition wire resistance chart, Fig. 1, for specific values. If resistance is not as specified, replace ignition wires as
necessary.