Amigo 4WD L4-2.3L (4ZD1) (1989)
19. BJ shaft assembly (19). Apply specified grease to the half of the space of the DOJ case (Approx. 50g (1.8 oz))
2O. Circlip (20). Install the circlip so that open ends are positioned away from the ball groove.
21. Bellows (21).
^
Before installation, insert the appropriate amount of specified grease into the DOJ case.
^
Adjust the air pressure within the bellows by inserting a screwdriver or equivalent, so that it equals to the atmospheric pressure.
22. Band (22). After installation, check that the bellows is free from distortion.