Removal and Installation of Transfer Case on Amigo 4WD L4-23L
5. Remove the gear shift lever (4).
Note: Cover the quadrant box or extension housing hole to prevent the entry of foreign material into the transmission.
Transfer Change Lever
Perform this procedure after removing the gear shift lever.
1. Place the transfer change lever in the "H" position.
2. Pull the transfer change lever grommet (1) and the dust cover (2) to the top of the transfer change lever.
3. Remove the retainer bolts (3).
4. Remove the transfer change lever (4) along with the retainer and the ball seat cover.
Note: Cover the quadrant box or extension housing hole to prevent the entry of foreign material into the transmission.
Lifting the Vehicle
1. Jack up the vehicle.
2. Place chassis stands at the front and the rear of the vehicle.
3. Remove the wheels from the vehicle.
Transmission and Transfer Case Oil Draining
1. Remove the transmission oil drain plug (1).
2. Remove the transfer case oil drain plug (2).
Transfer Case Protector