Amigo 4WD L4-2.3L (4ZD1) (1989)
2) Use a bearing remover to remove the ball bearing. Remover: J-37217 Puller: J-8433
3. Mainshaft End Lock Nut
1) Engage the 3rd-top synchronizer with the 3rd gear.
2) Engage the low-2nd synchronizer with the low gear.
3) Use the lock nut wrench to remove the lock nut. Lock Nut Wrench: J-37219
4. High-Low Synchronizer Assembly
5. High-Low Block Ring
6. Transfer Input Gear - Use the universal puller to remove the high-low synchronizer assembly the high-low block ring and the transfer input
gear.