Amigo 4WD L4-2.3L (4ZD1) (1989)
3. Detent Ball - Use a magnetic hand to remove the detent balls from the intermediate plate. Take care not to lose the detent balls.
8. 3rd-4th Shift Rod
9. 3rd-4th Shift Arm
10. 1st-2nd Shift Arm
1) Hold a round bar against the shift arm end. This will prevent damage to other components.
2) Use a spring pin remover to remove the shift arm spring pin from the shift arm and the shift rod. Discard the used spring pin.
3) Move the 3rd-4th shift rod forward. Take care not to lose the interlock pins.
11. Interlock Pin - Carefully remove the reverse shifter rod forward to avoid losing the interlock pins.
Note: Remove the shifter rods carefully. Interlock pins are located between the shifter rods in the intermediate plate.