Amigo 4WD L4-2.3L (4ZD1) (1989)
3. Ball Bearing
1) Use a pair of snap ring pliers to remove the snap ring.
2) Use a bench press and the bearing remover to remove the ball bearing. Bearing Remover: J-22912-O1
6. Mainshaft Snap Ring - Use a pair of snap ring pliers to remove the snap ring.
7. 3rd-4th Synchronizer Assembly
1) Use a bench press and the bearing remover to remove the synchronizer assembly as a set.
2) Disassemble the synchronizer assembly.
(1) Springs
(2) Sleeve
(3) Clutch Hub
(4) Inserts
11. Needle Bearing Collar
12. Mainshaft Ball Bearing
13. 1st Gear Thrust Bearing
14. 1st Gear - Use a bench press and the bearing remover to remove the ball bearing.