Amigo 4WD L4-2.3L (4ZD1) (1989)
/Page-520028.png)
1. Use a micrometer to measure the idler gear shaft diameter.
2. Use an inside dial indicator to measure the idler gear inside diameter.
3. Calculate the idler gear and idler gear shaft clearance. Idler gear inside diameter - idler gear shaft diameter = idler gear and idler gear shaft
clearance.
If the measured value exceeds the specified limit, the idler gear and/or the idler gear shaft must be replaced.
CLUTCH HUB SPLINE PLAY
1. Set a dial indicator to the clutch hub to be measured.
2. Move the clutch hub as far as possible to both the right and the left. Note the dial indicator reading.
If the measured value exceeds the specified limit, the clutch hub must be replaced.
BALL BEARING PLAY
