Amigo 4WD L4-2.3L (4ZD1) (1989)
/Page-520035.png)
13. 1st Gear
1) Apply engine oil to the needle bearing and the 1st gear thrust surfaces.
2) Install the needle bearing and the 1st gear to the mainshaft.
The 1st gear dog teeth must be facing the transmission front side.
14. 1st Gear Thrust Bearing - Install the thrust bearing to the mainshaft. The thrust bearing side must be facing the transmission front side.
15. Mainshaft Ball Bearing
16. Needle Bearing Collar
1) Apply engine oil to the ball bearing and the mainshaft.
2) Install the ball bearing and collar to the mainshaft. The ball bearing snap ring groove must be facing the transmission rear side.
3) Use a bench press to slowly force the collar into place. Installer: J-613301
17. Needle Bearing
18. 3rd Gear
1) Apply engine oil to the needle bearing and the 3rd gear thrust surfaces.
2) Install the needle bearing and the 3rd gear to the mainshaft.
The dog teeth of the 3rd gear must be facing the front side of the transmission.
20. 3rd-4th Synchronizer Assembly
