Amigo 4WD L4-2.3L (4ZD1) (1989)
/Page-520039.png)
5) Install the synchronizer assembly to the mainshaft. The clutch hub face (with the heavy boss) must be facing the reverse gear side.
The clutch hub groove (A) must be aligned with the key groove of sleeve.
8. Clutch Hub Nut
1) Mesh the 1st-2nd synchronizer with both the 1st and 3rd gears (double engagement). This will prevent the mainshaft from turning.
2) Install the mainshaft lock nut.
3) Use the lock nut wrench to tighten the lock nut to the specified torque. Wrench: J-37219
Hub Nut Torque: .................................................................................................................... 14 ± 12 (101.0 ± 14.2/137.2 ± 19.6) kg.m (lb.ft/N.m)
4) Use a punch to stake the lock nut.
12. Counter Reverse Gear
1) Apply engine oil to the counter reverse gear and the reverse gear.
2) Install the counter reverse gear to the counter gear. The reverse gear projection must be facing the side of the intermediate plate.
