Amigo 4WD L4-2.3L (4ZD1) (1989)
/Page-520048.png)
3) Measure the sub-gear preload.
32. Mainshaft End Lock Nut
1) Use the lock nut wrench to tighten the mainshaft end lock nut to the specified torque. Lock Nut Wrench : J-37219
Mainshaft End Lock Nut Torque: ................................................................................................... 13 ± 1 (94.0 ± 7.2/129.4 ± 9.8) kg.m (lb.ft/N.m)
2) Stake the lock nut.
33. Ball Bearing
Use the ball bearing installer to install the ball bearing. Installer: J-37223