Amigo 4WD L4-2.3L (4ZD1) (1989)
1) Clean and apply recommended liquid gasket or its equivalent to the through bolt threads.
2) Install the front cover with oil seal to the transmission case.
Take care not to damage the oil seal.
3) Tighten the front cover bolts to the specified torque.
Front Cover Bolt Torque: ......................................................................................................................................... 1.9 (13.7/18.6) kg.m (lb.ft/N.m)
6. Transfer Flange
1) Use the flange holder to install the flange to the rear transfer case. Flange Holder : J-37221
2) Tighten the transfer flange bolts to the specified torque.
Transfer Flange Bolt Torque: ................................................................................................................................ 14 (101.3/137.2) kg.m (lb.ft/N.m)
Troubleshooting
TROUBLESHOOTING
Refer to this Section to quickly troubleshoot and repair engine problems. Each diagnostic chart has three headings arranged from left to right.
(1) Checkpoint (2) Trouble Cause (3) Countermeasure
This Section is divided into four sub-sections:
1. Abnormal Noise
1. Noise in Neutral
2. Noisy Operation
2. Hard Shifting
3. Walking or Jumping Out of Gear
4. Oil Leakage
1. ABNORMAL NOISE