Amigo 4WD L4-2559cc 2.6L SOHC (4ZE1) (1993)
Water Pump: Service and Repair
Water Pump Overhaul
DISASSEMBLE
1. Bearing set screw
2. Impeller
^
Use a bench press and a bearing separator.
^
Bearing remover J-22912-01
^
Bearing unit remover J-38827
^
Or equivalents
3. Floating seal
4. Bearing unit
^
Heat the pump body in hot water approximately 49°C (120°F) for about 10 minutes.
^
Use a bench press and a bearing separator.
^
Bearing separator J-22912-01
^
Bearing unit remover J-38827
^
Or equivalents
^
Remove the bearing unit from pump body.
5. Fan hub
^
Remove the fan hub from the bearing unit.