Amigo 4WD L4-2559cc 2.6L SOHC (4ZE1) (1993)
Fuel Pressure Regulator Vacuum Switching Valve: Testing and Inspection
Fuel Pressure Control Solenoid Connector
Fuel Pressure Control Solenoid Terminals
VSV CHECK
-
Disconnect VSV connector.
-
Using an ohm meter, check resistance between "LgY" and "BW" wires. If resistance is not approximately 30 ohms, replace VSV.
Canister And Pressure Regulator Vacuum Switching Valve
-
Confirm that air passes between "throttle valve" and "pressure regulator" fittings
-
Apply battery voltage to VSV wires "LgY" and "BW". Solenoid should click and air should pass between "common chamber" and "pressure
regulator" fittings.
-
Replace VSV if faulty.