Amigo 4WD L4-2559cc 2.6L SOHC (4ZE1) (1993)
-
Place hub on a suitable work surface and remove the wheel studs, as required, using a hammer.
INSPECTION (VISUAL CHECK)
Inspect the following parts for wear, damage, or other abnormal conditions.
-
Hub
-
Hub bearing, oil seal
-
Knuckle spindle
-
Disc
-
Caliper
-
Automatic locking hubs
For inspection and servicing of disc caliper and relative parts, refer to "DISC BRAKES".
Inside diameter of housing measurement
Inspect flange surface A and B for excessive wear.