Amigo 1999 Front Brake Caliper Replacement for Disc Brake System
6. Remove guide bolt (2).
7. Remove caliper assembly.
8. Remove support bracket with pad assembly and take care not to damage the flexible brake hose when removing the support bracket.
9. Remove pad assembly with shim and mark the lining locations if they are to be reinstalled.
10. Remove clip.
INSTALLATION
1. Install clip (4).
2. Apply special grease (approximately 0.2 g) to both contacting surfaces of the inner shims (5). Wipe off extruded grease after installing. Install pad
assembly with shim.