Amigo 4WD V6-3.2L (1999)
Steering Wheel: Adjustments
Steering Wheel and Cable Reel Alignment
NOTE: To avoid misalignment of the steering wheel or airbag on reassembly, make sure the wheels are turned straight ahead before removing the
steering wheel.
1. Align the front wheels in the straight-ahead position.
2. Loosen the lock nut on the adjusting screw of the steering unit.
Cable Reel Alignment Marks / Label
-
Rotate the cable reel clockwise unit it stops.
-
Then rotate it counterclockwise (approximately two and a half turns) until the arrow mark on the cable reel label points straight up.
3. Turn the adjust screw clockwise to decrease free play, or counter-clockwise to increase free play.
4. After obtaining specified free play, tighten the lock nut to specified torque.