Ascender 2WD L6-4.2L (2003)
8.
Clean and prepare all of the welding surfaces.
9.
Return the surface to its original contour.
10.
Spot paint and clear the area around the hinges.
11.
Reinstall the liftgate.
12.
Replace the upper two bumpers and inspect the lower two bumpers. Replace as necessary.
Parts Information
Warranty Claim Information
Use the labor operation shown.
NOTE:
1.
Labor Time includes administrative time allowance.
2.
Information released on paper and electronic format prior to bulletin release cannot be updated. For the most current and up to date
information refer to the website
3.
Always refer to the Isuzu Service Policy Procedure Manual for specific details on warranty coverage and policies.
Disclaimer