Ascender 2WD L6-4.2L (2003)
Seat Back: Service and Repair
Seat Back Replacement - Front
Seat Back Replacement - Front
Removal Procedure
1. Remove the front bucket seat assembly from the vehicle.
2. Remove the seat cushion trim panel.
3. Remove the seat belt anchor nut.
4. Release the J-strips (1,4) across the bottom of the seat back cover.
Important: When separating the hook and loop retaining strips on the seat cover, do not pull the adhesive-backed band from the seat
pad.
5. Remove the pushpins (3) securing the seat cover (2) to the seat frame.
6. Carefully separate the hook and loop retaining strips, and lift the seat cover in order to expose the lower half of the seat back pad.
7. Remove the seat back pivot bolt.